Plumbing InstallationNew lines, fixtures and repipes
Local shop · 355 Sackett Point Rd
Plumbing Installation in Hamden, CT Repipes & New Lines
When patching old pipe stops making sense, or a remodel needs new lines, M & G Plumbing & Heating installs new plumbing and replaces what's worn out, cleanly and to code.
Reliable service. Quality work. Every time.
InstallationRepiping, fixtures & new lines
- PlumbingLeaks, drains, fixtures
- HeatingFurnaces & boilers
- Water HeatersTank & tankless
- Repairs & InstallationsHomes & businesses
New plumbing
Hamden, CT Plumbing Installation & Replacement
Our plumbing installation in Hamden, CT covers two kinds of work: replacing plumbing that has worn out, and installing new lines and fixtures for a remodel or an addition.
Replacement usually means galvanized supply pipe that's rusting from the inside, copper that keeps springing pinhole leaks, or old valves that won't close. New work means supply and drain lines, vents and fixtures, installed so they pass inspection the first time.
For a one-off leak, plumbing repair is usually enough. For a new water heater, see water heater installation.
Copper or PEXChosen for your house
2Pipe choices: copper and PEX
1Price agreed before work
16Plumbing & heating services
1Local shop on Sackett Point Rd
Old pipe out
Repiping in Hamden, CT
Repiping replaces old supply lines throughout the house, or just the worst sections. We plan routes that keep wall openings small, and restore water at the end of each day when we can.
- Galvanized pipe replacement
- Copper or PEX, chosen for your house
- New shut-off valves at every fixture
- Clean patching areas ready for your painter
New fixtures
Fixture & Valve Installation in Hamden, CT
New fixtures and valves are where most remodels start and end:
- Sinks, faucets and vanities
- Toilets and shower valves
- Main and fixture shut-off valves
- Hose bibs and frost-free outdoor faucets
- Supply lines for dishwashers, fridges and laundry
How it works
How a Plumbing Installation Works
01
Call (203) 568-2475
Tell us what's going on and where. A person answers, not a menu.
02
We Head Over
A tech leaves our Sackett Point Road shop with a stocked van.
03
Fixed & Explained
We show you the cause, give you the price before starting, and clean up.
Rusty water?
Rusty Water or Low Pressure in Hamden, CT?
Both often point to galvanized pipe rusting from the inside. A repipe fixes both for good. Call (203) 568-2475 for a look.
Heating & AC
Heating Installation in Hamden, CT
Heating installation is on our HVAC line: new furnaces and boilers and oil-to-gas conversions.
- Boiler installation
- Furnace installation
- Oil-to-gas conversion
- Central AC installation
Everything we do
All Plumbing & Heating Services in Hamden, CT
Sixteen services from one local shop. Plumbing calls go to (203) 568-2475; heating and AC calls go to our HVAC line.
Residential PlumbingHomes, condos and multi-family
Commercial PlumbingShops, offices and restaurants
Plumbing RepairLeak and pipe repair
Plumbing InstallationNew lines, fixtures and repipes
Plumbing InspectionBefore you buy or renovate
Water Leak DetectionHidden and pipe leaks
Toilet RepairClogs, running and leaking toilets
Sewer & Drain CleaningMain lines and backups
Sinks & FaucetsFaucet repair and new sinks
Garbage DisposalsJammed units and installs
Sump PumpsPump installation, flood prevention
Gas Leak RepairLeak detection and gas lines
Water HeatersTank and tankless, repair and install
HeatingFurnace repair and installation
Air ConditioningAC installation and repair
Oil-to-Gas ConversionGas boilers and oil tank removal
Related services
Related Services in Hamden, CT
Why M & G
Why Hamden, CT Calls M & G for New Plumbing
Plumbing and heating from a team you can reach, that shows up ready to work.
Local Shop
We work out of 355 Sackett Point Road, a short drive from the homes and businesses we serve.
Two Direct Lines
One number for plumbing, one for heating and AC, so your call reaches the right tech.
Price Before Work
We explain the problem and the cost before we start. No surprises on the bill.
Plumbing + Heating
Pipes, water heaters, furnaces and boilers: one company for the whole basement.
Where we work
Serving Hamden, CT & Nearby Towns
From our shop on Sackett Point Road we cover Hamden and the towns around it. Pick yours, or call and ask.
Frequently asked
Installation Questions
What homeowners ask before a repipe or install. Don't see yours? Call (203) 568-2475.
(203) 568-247501How do I know if my house needs repiping?
Low pressure throughout the house, rusty water, or repeated leaks in the same pipe are the usual signs.
02Copper or PEX?
Both last. PEX installs with fewer wall openings; copper suits some homes better. We'll explain the tradeoffs.
03Will I have water during a repipe?
Usually yes, in the evening. We restore water at the end of each workday whenever we can.
04Should I repipe with PEX or copper?
Both work. A PEX repipe goes faster, needs fewer joints and usually costs less. A copper repipe lasts for decades and suits exposed basement runs. We'll explain which fits your house.
05Is shut-off valve replacement worth doing?
Yes, especially in older Hamden homes, where old gate valves often won't close when you need them. Shut-off valve replacement is quick, and it means a leak can be stopped in seconds.
06Do you do installations outside Hamden, CT?
Yes. We cover New Haven and the other towns near our shop.
Open 24/7 · two lines, one local team
Plan a Project With M & G in Hamden, CT
Plumbing calls go straight to our plumbers; heating and AC calls go to our HVAC team. See all the ways to reach us.
Water spreading or smell gas? Call now, and for gas, call your utility from outside first.
Get in Touch
- Plumbing(203) 568-2475
- Heating & AC (HVAC)(203) 720-6914
- Email · questions & photosmandgplumbingct@gmail.com
- HoursOpen 24/7, every day, holidays included
- Shop355 Sackett Point Rd
North Haven, CT 06473 Get directions
Follow us