Plumbing & HVAC Cost Estimator for Hamden, CT
Pick the job, how big it is and how soon you need it. The estimator shows a typical price range right away, for plumbing work from a dripping faucet to a whole-house repipe, and for heating and AC from a tune-up to an oil-to-gas conversion.
Typical U.S. price ranges, not an M & G quote. We confirm the price before any work starts.
Estimate Your Cost
Results update as you choose.
Includes labor and standard parts. Fixtures you choose, permits and hidden damage can add to it.
Typical Plumbing & HVAC Costs Job by Job
Every job in the estimator, with the typical U.S. price range from 2026 cost guides. Simple jobs land near the bottom of the range, complex ones near the top.
| Job | Typical range | Type |
|---|---|---|
| Faucet repair | $75 – $300 | Plumbing |
| Faucet replacement | $150 – $450 | Plumbing |
| Toilet repair | $100 – $400 | Plumbing |
| Toilet replacement | $250 – $800 | Plumbing |
| Clogged drain (one fixture) | $100 – $400 | Plumbing |
| Main sewer line cleaning | $150 – $800 | Plumbing |
| Garbage disposal, installed | $150 – $500 | Plumbing |
| Leak detection | $150 – $900 | Plumbing |
| Leaking pipe repair | $175 – $2,000 | Plumbing |
| Sump pump replacement | $500 – $1,800 | Plumbing |
| Tank water heater replacement | $800 – $2,500 | Plumbing |
| Tankless water heater, installed | $1,500 – $6,000 | Plumbing |
| Gas line for an appliance | $500 – $2,000 | Plumbing |
| Whole-house repipe | $4,000 – $15,000 | Plumbing |
| Plumbing inspection | $200 – $1,200 | Plumbing |
| Furnace repair | $125 – $2,500 | Heating & AC |
| Boiler repair | $200 – $1,800 | Heating & AC |
| AC repair | $150 – $1,800 | Heating & AC |
| Heating or AC tune-up | $75 – $200 | Heating & AC |
| Oil-to-gas conversion | $6,000 – $20,000 | Heating & AC |
| Oil tank removal | $500 – $3,000 | Heating & AC |
Emergency visits at night, on weekends or on holidays often add a fee of about $100 to $300. A diagnostic or service call alone typically runs $75 to $250.
National Ranges, Local Answers
The ranges in this cost estimator come from 2026 national cost guides, including Angi, HomeGuide and Fixr, rounded and combined where the guides disagree. They're not M & G's price list.
Connecticut prices often run above national averages, and older Hamden houses can need extra work: seized shut-off valves, galvanized pipe, or venting that has to be updated when a water heater is replaced. That's why the only number that counts is the one we give you after seeing the job.
- The price is confirmed before any work starts
- Repair or replace: you get both options when both make sense
- Open 24/7 on both lines, holidays included
What Changes the Price of a Job
Two jobs with the same name can cost very different amounts. Here's why.
Access
A pipe under an open sink is quick. The same pipe behind tile, under a slab or in a crawl space takes longer.
Timing
Nights, weekends and holidays often cost more. If a problem can safely wait, scheduling it usually costs less.
Age of the System
Old galvanized pipe, stuck valves and outdated fittings often need extra work before new parts can connect safely.
Equipment You Choose
A designer faucet, a tankless water heater or a high-efficiency boiler costs more than a standard model.
Heating Type
Oil, gas, steam and hot water systems each have their own parts. An oil-to-gas conversion also depends on venting and gas piping.
Hidden Problems
Opening a wall can reveal more damage, which is why leak detection comes first. We explain it and confirm the price before going further.
Cost Questions
Want a firm number for your job? Call (203) 568-2475 for plumbing or (203) 720-6914 for heating and AC.
(203) 568-247501Is the online estimate a quote from M & G?
No. It shows typical U.S. price ranges from 2026 cost guides. Every job is different, so we confirm the price after seeing the problem and before any work starts.
02How much does a plumber cost in Hamden, CT?
It depends on the job. Small repairs like a faucet or a running toilet usually cost a few hundred dollars or less, while a water heater replacement or a repipe costs much more. Pick your job in the estimator for a typical range, then call for a firm price.
03What does a water heater replacement cost?
A standard tank water heater replacement typically runs about $800 to $2,500 installed; tankless units cost more. Venting, gas line and code updates in older houses can add to it.
04Why does an emergency visit cost more?
Emergency work happens right away, often at night, on weekends or on holidays. If a problem can safely wait, scheduling it usually costs less. We're open 24/7 either way.
05Does the estimate include parts?
It includes labor and standard parts. Fixtures and equipment you pick, permits and any hidden damage are extra.
Talk to M & G in Hamden, CT
Describe the job and we'll give you a straight answer. Open 24/7, every day, holidays included.
Prefer email? See all the ways to reach us.